Multi-Functional Extraction and Concentration Trial Unit
Extraction and concentration pilot
Application
This equipment integrates the extraction and concentration of Chinese medicinal materials into a single unit, enabling simultaneous and one-step processing until the desired extract density is achieved. It replaces the conventional two-step method involving separate extraction and concentration stages. The unit supports normal-pressure extraction and concentration, suitable for hot reflux extraction using ethanol and other organic solvents. It can also be adapted to traditional fractional extraction with water as the solvent under normal pressure, followed by vacuum concentration of the hot liquid.
Equipment Structure:
The Unit Is Composed of Extraction Tank, Single-Effect Flow Reducer, Condenser, Oil-Water Separator, Automatic Drainage System, Filter, Sanitary Class Centrifugal Pump, Etc. The Stainless Steel Bracket is assembled as a whole. Efficient, Energy-Saving, Compact Layout, Reasonable Structure, Simple Operation, Complete Function.

Technical Parameter
|
Volume of extractor (L) |
500L |
1000L |
2000L |
3000L |
6000L |
|
Capacity of evaporator (Kg) |
250 |
500 |
800 |
1000 |
2000 |
|
Temperature of extraction (℃) |
90 ~ 100 |
||||
|
Temperature of evaporation (℃) |
55 ~ 75 |
||||
|
Vacuum degree (MPa) |
-0.06 ~ -0.095 |
||||
|
Note: The above parameters are approximate data and will be customized according to the customer's design specifications. |
|||||
Working Principle
Load the medicinal materials into the extraction tank and add 5–10 times the required amount of solvent (e.g., water or ethanol) as specified by the extraction process.
Open the steam valve of the extraction tank and heat for approximately one hour. Then, activate the vacuum system to transfer the medicinal liquid into the heater. Open the steam valve of the primary heater to initiate heating and evaporation.
After heating, the extract undergoes flash distillation in the separation concentrator. The resulting tangential secondary steam enters the extraction tank, serving both as a heat carrier for the solvent and as an agitator.
Residual vapor proceeds to the condenser, where it is cooled into liquid solvent and refluxed into the extraction vessel. The condensate then passes through a heat exchanger, raising its temperature close to the boiling point of the solution in the extractor, before any remaining vapor is directed to the condenser. This high solvent reflux maintains a strong concentration gradient between the medicinal materials and the solute-rich solvent, facilitating rapid dissolution.
Advantage

Only require water and electricity, occupy a small area

High automatic control level, convenient operation

dynamic extraction and concentration, and high efficiency

All made of stainless steel, which can work under negative pressure/ atmospheric pressure /positive pressure.

The residue is lifted out through the basket, greatly improve the efficiency and the work environment.

The extraction and concentration temperature can be controlled, displayed, and detected online.
Scope of Application
◆It is widely used in the research and development of new drugs in scientific research institutions, colleges and universities, pharmaceutical companies, or small batch production of extraction and concentration of medicinal materials, or low-temperature extraction and concentration of fresh plant.
Hot Tags: multi-functional extraction and concentration trial unit, China multi-functional extraction and concentration trial unit manufacturers, suppliers, factory, Zhejiang Tanlet Machinery, Multi Functional Extraction And Concentration Trial Unit, Percolation Tank, Multi Claw Extractor, extraction and concentration trial unit, extractor tank, Heat Reflux Extraction And Concentration Trial Uni
Send Inquiry

